Florida Fire Alarm Technician License: FASA 2026 Guide

Official-source review: August 25, 2026

Florida fire alarm technician license: For employees, the operative credential is the Fire Alarm System Agent (FASA) card rather than an independent contractor license. The employing company must operate under appropriate EC or Certified Alarm System Contractor I (EF) authority; Alarm II excludes fire alarms.

Fast answer: A covered employee must be at least 18, complete 14 hours of board-approved FASA training and obtain the required FDLE fingerprint/background check. These conditions must be completed within 90 days of employment. The FASA credential renews every two years with a six-hour approved renewal course and background check.

Florida fire alarm technician license FASA training fingerprint and employer requirements — Florida requirements summarized from the responsible agencies. Local permits, employers and certifying bodies may impose additional conditions.

What the Florida fire alarm technician license covers

Florida layers the individual agent credential beneath the contractor license. EF covers all alarm systems and EC can perform alarm work within its scope; the employee then satisfies FASA unless an exemption applies.

Employee contracting or installation activity involving fire alarm systems.
Work under a licensed electrical or Alarm System Contractor I employer.
Initial FASA training and identification requirements.
Background screening required by the alarm-agent rules.
Two-year renewal education and screening.

Business owners should also review the Florida EC guide and the Alarm I licensing information.

Florida fire alarm technician license requirements at a glance

Requirement	Current rule or route
Employee credential	Fire Alarm System Agent (FASA)
Minimum age	18
Initial education	14 hours from approved provider
Background	FDLE fingerprints/check
Completion deadline	Within 90 days of employment
Renewal education	6 hours
Renewal cycle	Two years

Do not treat this table as an approval notice. The agency, certification organization or local jurisdiction makes the final eligibility decision and may request additional evidence.

How to complete the Florida fire alarm technician license process

Confirm the position performs covered fire-alarm contracting or installation work.
Enroll with a board-approved FASA provider.
Complete the 14-hour initial course.
Complete FDLE fingerprint and background requirements.
Obtain and carry the agent identification through the employer/provider process.
Complete the six-hour renewal course and new background check every two years.

Keep copies of every experience certificate, examination result, bond or insurance filing and payment receipt. Names and business entities should match across the application and supporting documents.

Important Florida rules and boundaries

FASA does not allow an employee to contract independently with the public.
Alarm System Contractor II excludes fire alarms.
Licensed contractor and licensed journeyman exemptions are limited; a card and renewal course can still apply.
Monitoring-only employees and certain statutory categories may be exempt.

Florida may separate the credential held by a worker from the contractor license held by the business, while preserving local authority over permits and inspections. Confirm every applicable layer before bidding, advertising or beginning regulated work.

Florida fire alarm technician license cost and renewal

There is no single combined state price for the worker route because training, fingerprints and agent-card administration are provided through different approved channels.

Renew every two years with six hours of approved training and the required background check. Do not rely on the employer to track the personal expiration date.

Government charges are only part of the expected cost. Training, examination preparation, fingerprints, surety premiums, insurance, equipment calibration and local permits can add to the total.

Florida fire alarm technician license checklist

Confirm that this credential matches the exact work you will perform.
Check whether the applicant is an individual, sole owner or separate business entity.
Collect experience and training records before submitting the application.
Use the current official form and fee schedule.
Complete every required examination or approved certification route.
File bonds, insurance and fingerprints when applicable.
Check county, city, water supplier and building-permit rules.
Save the expiration date and renewal requirements.

Frequently asked questions

What does FASA stand for?

Fire Alarm System Agent.

How many training hours are required?

Fourteen hours initially and six hours for renewal.

Can I start before training is complete?

DBPR states the training and background check must be completed within 90 days of employment.

Can an Alarm II contractor perform fire alarm work?

No. Alarm II excludes fire alarm systems.

Official sources used

Verified licensing details

Licensing authority: Florida DBPR Electrical Contractors Licensing Board
Fees: Training-provider, fingerprint and card fees vary; the employer-side EF/EC contractor application has separate state and examination fees.
Experience: No general hour requirement for the employee FASA route; age, training and background conditions apply.
Exams: The employee completes a board-approved 14-hour FASA course; contractor licensure has separate examinations.
Insurance or bond: The employer maintains contractor and business insurance; FASA is not a stand-alone contracting license.
Continuing education: 14 hours initially; six-hour renewal course every two years.
Renewal period: FASA/background cycle every two years.

Official sources

Official sources last checked August 24, 2026.

Requirements can change and local rules may apply. Confirm the current requirements with the official authority before paying a fee or beginning work.