Florida Plumbing Contractor License Requirements: Complete 2026 Guide

Official-source review: August 25, 2026

Florida plumbing contractor license: A Certified Plumbing Contractor (CF/CFC) may contract statewide. A Registered Plumbing Contractor (RF) relies on local competency and works only in accepted jurisdictions. Florida licenses the individual contractor, who must qualify the construction business.

Fast answer: The certified route normally requires four years of plumbing experience or an accepted education/experience combination, the required construction examination parts, financial responsibility, insurance and approval to qualify the business. Certified plumbing licenses renew on August 31 of even-numbered years with 14 hours of CE.
Florida plumbing contractor license certified CF registered RF experience exam renewal
Florida requirements summarized from the responsible agencies. Local permits, employers and certifying bodies may impose additional conditions.

What the Florida plumbing contractor license covers

The certified/registered distinction controls geography. Certification establishes statewide competency; registration records a locally issued competency license with DBPR.

  • Installation, maintenance, repair, alteration and extension of plumbing.
  • Sanitary and storm drainage within statutory scope.
  • Water supply and related plumbing systems.
  • Statewide contracting under certification.
  • Qualification of the construction business and local permits.

For onsite wastewater work, compare the Florida septic contractor guide.

Florida plumbing contractor license requirements at a glance

Requirement Current rule or route
Statewide route Certified Plumbing Contractor (CF/CFC)
Local route Registered Plumbing Contractor (RF)
Experience Four years or accepted education credit
Exams Plumbing category plus Business and Finance
Business Qualified by the individual licensee
CE 14 hours
Renewal Certified even years; registered odd years

Do not treat this table as an approval notice. The agency, certification organization or local jurisdiction makes the final eligibility decision and may request additional evidence.

How to complete the Florida plumbing contractor license process

  1. Choose certified statewide or registered local practice.
  2. Document qualifying plumbing experience.
  3. Pass the certified examination parts when seeking statewide authority.
  4. Submit the licensure application and financial/background records.
  5. Qualify the business and file insurance and workers compensation documents.
  6. Obtain local plumbing permits before each project.

Keep copies of every experience certificate, examination result, bond or insurance filing and payment receipt. Names and business entities should match across the application and supporting documents.

Important Florida rules and boundaries

  • A registered plumbing license is not automatically valid statewide.
  • The individual contractor must qualify the business entity.
  • Local permits and inspections remain required for a certified contractor.
  • State-licensed plumbers have a septic-registration exemption, but must follow DEP onsite-sewage rules.

Florida may separate the credential held by a worker from the contractor license held by the business, while preserving local authority over permits and inspections. Confirm every applicable layer before bidding, advertising or beginning regulated work.

Florida plumbing contractor license cost and renewal

Use current CILB and examination-vendor schedules because application totals change with timing and whether the contractor qualifies a business.

Certified plumbing licenses renew in even years and registered licenses in odd years. Complete 14 CE hours and maintain insurance and business qualification.

Government charges are only part of the expected cost. Training, examination preparation, fingerprints, surety premiums, insurance, equipment calibration and local permits can add to the total.

Florida plumbing contractor license checklist

  • Confirm that this credential matches the exact work you will perform.
  • Check whether the applicant is an individual, sole owner or separate business entity.
  • Collect experience and training records before submitting the application.
  • Use the current official form and fee schedule.
  • Complete every required examination or approved certification route.
  • File bonds, insurance and fingerprints when applicable.
  • Check county, city, water supplier and building-permit rules.
  • Save the expiration date and renewal requirements.

Frequently asked questions

Can a certified plumber work statewide?

Yes, subject to permits and active status.

Can a registered plumber work statewide?

No. Registration is limited to accepted jurisdictions.

Who holds the business license?

Florida licenses the individual contractor, who qualifies the business entity.

Does a plumber need septic registration?

A state-licensed plumber is exempt from septic contractor registration, but not from other DEP and permit requirements.

Official sources used

Verified licensing details

Licensing authority
Florida DBPR Construction Industry Licensing Board
Fees
Application, examination and initial-license fees depend on the active CILB form and timing; renewal is listed at $205 plus $50 per qualified business.
Experience
Four years of experience or an approved college/experience combination.
Exams
Plumbing trade/project management and Business and Finance examination requirements for certification.
Insurance or bond
Financial responsibility, liability/property damage coverage and workers compensation or lawful exemption.
Continuing education
14 hours of approved CE per biennial cycle.
Renewal period
Certified: August 31 even-numbered years; registered: August 31 odd-numbered years.

Official sources

Official sources last checked August 24, 2026.

Requirements can change and local rules may apply. Confirm the current requirements with the official authority before paying a fee or beginning work.

Scroll to Top